Buy österreich.be ?
We are moving the project
österreich.be .
Are you interested in purchasing the domain
österreich.be ?
domain@kv-gmbh.de · 0541-91531010
Buy österreich.be ?
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
What is the refresh rate in Hertz (Hz) at 165 frames per second (fps)?
The refresh rate in Hertz (Hz) at 165 frames per second (fps) would be 165 Hz. This means that the display would refresh 165 times per second to keep up with the 165 frames being displayed each second. A higher refresh rate like 165 Hz can result in smoother motion and reduced motion blur, making it ideal for gaming and fast-paced content. **
Similar search terms for Hertz-Cento-CK-165
Top-Angebote
Products related to Hertz-Cento-CK-165:
-
Hertz Cento CK 165 FHertz Cento CK 165 F is a 16.5 cm Speaker Set with C 26 Tweeter (26 mm Tetolon diaphragm, 20 mm voice coil) and flat CK 165 F mid-bass driver. The nominal power handling is 90 W RMS, the peak power handling is 270 W, and the impedance is 4 Ohms. The frequency response is 65–22.5 kHz with a sensitivity of 93 dB. The C 26 uses a neodymium magnet and a FEM-optimized faceplate geometry. The CK 165 F features a flat installation profile, a semi-pressed paper diaphragm with mica powder, a neodymium magnet, and low-carbon pole plates, as well as a pure copper voice coil on an aluminum former. The passive Crossover CCX 2 is ultra-compact, with high-frequency level adjustable in two steps (0, +3 dB), low-loss capacitors, pure copper coils, and ventilation slots. A metal Speaker Grille in a plastic frame is included. The crossover frequency of the filter is at 2.5 kHz with 12 dB/octave. Features 16.5 cm Speaker Set C 26 Tweeter with 26 mm Tetolon diaphragm and 20 mm voice coil Neodymium magnet on the tweeter Tweeter faceplate geometry optimized with FEM CK 165 F mid-bass driver with flat installation profile Semi-pressed paper diaphragm with mica powder Neodymium magnet and low-carbon pole plates on the mid-bass driver Pure copper voice coil on aluminum former (mid-bass driver) Ultra-compact passive Crossover CCX 2 High-frequency level adjustable: 0, +3 dB Low-loss capacitors and copper coils (crossover) Ventilation slots on the crossover Metal Speaker Grille in a plastic frame Slim basket with reduced depth Technical Specifications Size: 165 mm Power handling RMS: 90 W Power handling Peak: 270 W Impedance: 4 Ohms Sensitivity: 93 dB Frequency response: 65–22.5 kHz Crossover frequency: 2.5 kHz at 12 dB/oct. Crossover type: passive 2-way crossover Tweeter diaphragm: 26 mm Tweeter voice coil: 20 mm Mid-bass driver voice coil: 25 mm Weight of woofer: 0.72 kg Weight of tweeter: 0.03 kg Weight of crossover: 0.185 kg D: 134 mm Re: 2.7 Ohms Fs: 80 Hz Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Spl: 93 dB146,57 €*Shipping: 12,76 €Secure redirect to the provider
-
Hertz Cento CK 130The Cento CK 130 is a 5 Inch (13 cm) Speaker Set from Hertz in a 2-way design with a passive 2-way crossover and a crossover frequency of 2.5 kHz at 12 dB/Oct. A Tetolon tweeter with a 26 mm diaphragm and 20 mm voice coil combines with a 130 mm mid-woofer with a 25 mm voice coil. The impedance is 4 Ohm, the sensitivity is 92.5 dB SPL, and the frequency response ranges from 65 Hz to 22.5 kHz. The power handling is 70 W RMS and 210 W Peak. An oversized ferrite magnet, ultra-compact crossovers, and a durable speaker grille are integrated. Features 5 Inch (13 cm) Speaker Set 2-Way System Passive 2-Way Crossover Crossover Frequency 2.5 kHz, 12 dB/Oct Tetolon Tweeter Mid-Woofer Oversized Ferrite Magnet Ultra-Compact Crossovers Durable Speaker Grille Size 130 mm Tweeter Diaphragm 26 mm Woofer Voice Coil 25 mm Tweeter Voice Coil 20 mm Impedance 4 Ohm Sensitivity 92.5 dB SPL Frequency Response 65 Hz – 22.5 kHz RMS Power 70 W Peak Power 210 W Technical Data D 110 mm Re 3.1 Ohm Fs 80 Hz Le 0.17 mH Vas 6.30 l Mms 8 g Cms 0.50 mm/N BL 4.1 T·m Qts 0.61 Qes 0.72 Qms 3.9 Weight Woofer 0.7 kg Weight Tweeter 0.03 kg Weight Crossover 0.185 kg138,11 €*Shipping: 12,43 €Secure redirect to the provider
-
Hertz Cento CX 165Hertz Cento CX 165 is a 6.5 inch (16.5 cm) coaxial speaker as a 2-way coaxial system. The high-frequency section includes a 24 mm Soft-Tetolon tweeter with a 20 mm voice coil, ferrofluid cooling, RHFC (Rotary High Frequency Contour), and FEM-optimized faceplate. The mid-bass driver uses a 25 mm voice coil on an aluminum carrier, a 165 mm SPP-M membrane made of semi-pressed paper with mica, and a high-density flux ferrite magnet; the tweeter operates with a neodymium magnet. The power handling is 70 W RMS and 210 W Peak at 4 Ohm impedance. Frequency response is 55–22000 Hz and sensitivity is 93 dB. Xmech 4.9 mm. Magnet sizes: woofer 85 x 32 x 15 mm, tweeter 13 x 2 mm; voice coil diameter: woofer 25 mm, tweeter 13 mm. Dimensions A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, F 24 mm, and Und 171 mm. Electroacoustic parameters: D 131.5 mm, Re 3.2 Ohm, Fs 65 Hz, Le 0.21 mH, Vas 12.2 l, Mms 13.3 g, Cms 0.46 mm/N, BL 4.8 Tm, Qts 0.60, Qes 0.73, Qms 3.4. Weight per speaker 0.95 kg. Features 6.5 inch (16.5 cm) coaxial speaker 2-way coaxial system 24 mm Soft-Tetolon tweeter 20 mm tweeter voice coil Ferrofluid cooling in the tweeter RHFC (Rotary High Frequency Contour) tweeter FEM-optimized tweeter faceplate 25 mm voice coil on aluminum carrier (mid-bass driver) 165 mm SPP-M membrane (semi-pressed paper + mica) High-density flux ferrite magnet, low-carbon pole plates (mid-bass driver) Neodymium tweeter magnet Compact 3-spoke basket Rubber magnet protection Speaker grille made of ABS with metallic finish and metal mesh Optimization for off-axis operation Power handling RMS 70 W Power handling Peak 210 W Impedance 4 Ohm Frequency response 55–22000 Hz Weight per speaker 0.95 kg Technical Specifications SPL 93 dB Xmech 4.9 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 13 mm Magnet size woofer 85 x 32 x 15 mm Magnet size tweeter 13 x 2 mm D 131.5 mm Re 3.2 Ohm Fs 65 Hz Le 0.21 mH Vas 12.2 l Mms 13.3 g Cms 0.46 mm/N BL 4.8 Tm Qts 0.60 Qes 0.73 Qms 3.4 A 165 mm B 142 mm C 71 mm D 62.5 mm Und 171 mm F 24 mm85,97 €*Shipping: 12,26 €Secure redirect to the provider
-
Hertz Cento CG 165The Hertz Cento CG 165 is a Speaker Grille for speaker covers in 165 mm. It features a highly durable ABS metal grille as well as a removable metal grille. The diameter is 16.5 cm (165 mm). The finish is in gray. The delivery is as a pair. Features Speaker Grille Speaker covers for 165 mm speakers Highly durable ABS metal grille Removable metal grille Diameter: 165 mm Quantity: 1 pair Color: Gray15,37 €*Shipping: 11,74 €Secure redirect to the provider
-
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
-
What can be done if CK levels and CK-MB levels are too high?
If CK levels and CK-MB levels are too high, it may indicate muscle or heart damage. In such cases, it is important to consult a healthcare professional for further evaluation and treatment. The underlying cause of the elevated levels will need to be identified and addressed. This may involve lifestyle changes, medication, or other interventions to manage the condition and reduce the risk of complications. Regular monitoring of CK and CK-MB levels may also be necessary to track progress and ensure that the treatment is effective. **
-
Is the CK underwear too big?
The fit of CK underwear can vary depending on the style and individual body shape. It's important to consider the specific style and size of the underwear in question. If the underwear feels too big or doesn't provide the desired fit, it may be worth trying a different size or style to find the best fit for your body. Additionally, considering the fabric and stretch of the underwear can also impact the fit. **
-
'How do you like CK One?'
I really like CK One because it has a fresh and clean scent that is perfect for everyday wear. It's not too overpowering and has a unisex appeal, making it versatile for both men and women. The citrus and green tea notes give it a refreshing and energizing vibe, which I enjoy. Overall, CK One is a great fragrance for anyone looking for a light and casual scent. **
What does "F*ck dich" mean?
"F*ck dich" is a German phrase that translates to "F*ck you" in English. It is a vulgar and offensive expression used to convey anger, frustration, or contempt towards someone. It is important to be aware of the strong language and potential consequences of using such words in different cultural and social contexts. **
Which cable, 60 Hertz or 144 Hertz, is the best for gaming?
The 144 Hertz cable is generally considered the best for gaming. This is because it offers a higher refresh rate, allowing for smoother and more responsive gameplay. The higher refresh rate of 144 Hertz can provide a competitive edge in fast-paced games, as it reduces motion blur and input lag. Overall, the 144 Hertz cable is preferred by many gamers for its superior performance in gaming scenarios. **
Top-Angebote
Products related to Hertz-Cento-CK-165:
-
Hertz Cento CK 165The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg146,57 €*Shipping: 12,42 €Secure redirect to the provider
-
Hertz Cento CK 165 LThe Hertz Cento CK 165 L is a 6.5-inch (16.5 cm) Speaker Set with a passive 2-way crossover. It includes the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the CK 165 L mid-bass driver with a non-pressed paper diaphragm, a 25 mm voice coil on an aluminum carrier, and a neodymium magnet with low-carbon pole plates. The CCX 2T and CCX 2W crossovers are separate and ultra-compact, and the high-frequency level is adjustable in three steps. Performance data: 100 W RMS, 300 W Peak, 4 Ohm impedance, sensitivity of the Tweeter 92 dB and the mid-bass driver 91 dB, frequency response 50 to 22.5 kHz. The filters operate at 3.8 kHz with 6 dB/Oct (LP) and 12 dB/Oct (HP). Additional features include FEM-optimized faceplate geometry, a compact 3-spoke chassis with rubber protection for the magnet, and a metal Speaker Grille in a plastic frame. Features 6.5-inch (16.5 cm) Speaker Set RMS power 100 W Peak power 300 W Impedance 4 Ohm Frequency response 50–22.5 kHz Sensitivity of Tweeter 92 dB SPL Sensitivity of mid-bass driver 91 dB SPL C 26 Tweeter with 26 mm Tetolon diaphragm Tweeter voice coil 20 mm Neodymium magnet on the Tweeter FEM-optimized faceplate geometry Installation accessories CK 165 L mid-bass driver with non-pressed paper diaphragm Mid-bass driver voice coil 25 mm on aluminum carrier Neodymium magnet with low-carbon pole plates on the mid-bass driver Compact 3-spoke basket, rubber protection for the magnet Metal Speaker Grille with plastic frame Separate, ultra-compact crossovers CCX 2T and CCX 2W High-frequency level adjustable in three steps (-2, 0, +2 dB) Low-loss components, pure copper coils Passive 2-way crossover design Technical Specifications Crossover filter: LP 6 dB/Oct at 3.8 kHz, HP 12 dB/Oct at 3.8 kHz Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohm Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 Tm Qts 0.60 Qes 0.70 Qms 3.8 SPL 91 dB Weight of Tweeter 0.037 kg Weight of crossover 0.037 kg146,57 €*Shipping: 12,36 €Secure redirect to the provider
-
Hertz Cento CK 165 FHertz Cento CK 165 F is a 16.5 cm Speaker Set with C 26 Tweeter (26 mm Tetolon diaphragm, 20 mm voice coil) and flat CK 165 F mid-bass driver. The nominal power handling is 90 W RMS, the peak power handling is 270 W, and the impedance is 4 Ohms. The frequency response is 65–22.5 kHz with a sensitivity of 93 dB. The C 26 uses a neodymium magnet and a FEM-optimized faceplate geometry. The CK 165 F features a flat installation profile, a semi-pressed paper diaphragm with mica powder, a neodymium magnet, and low-carbon pole plates, as well as a pure copper voice coil on an aluminum former. The passive Crossover CCX 2 is ultra-compact, with high-frequency level adjustable in two steps (0, +3 dB), low-loss capacitors, pure copper coils, and ventilation slots. A metal Speaker Grille in a plastic frame is included. The crossover frequency of the filter is at 2.5 kHz with 12 dB/octave. Features 16.5 cm Speaker Set C 26 Tweeter with 26 mm Tetolon diaphragm and 20 mm voice coil Neodymium magnet on the tweeter Tweeter faceplate geometry optimized with FEM CK 165 F mid-bass driver with flat installation profile Semi-pressed paper diaphragm with mica powder Neodymium magnet and low-carbon pole plates on the mid-bass driver Pure copper voice coil on aluminum former (mid-bass driver) Ultra-compact passive Crossover CCX 2 High-frequency level adjustable: 0, +3 dB Low-loss capacitors and copper coils (crossover) Ventilation slots on the crossover Metal Speaker Grille in a plastic frame Slim basket with reduced depth Technical Specifications Size: 165 mm Power handling RMS: 90 W Power handling Peak: 270 W Impedance: 4 Ohms Sensitivity: 93 dB Frequency response: 65–22.5 kHz Crossover frequency: 2.5 kHz at 12 dB/oct. Crossover type: passive 2-way crossover Tweeter diaphragm: 26 mm Tweeter voice coil: 20 mm Mid-bass driver voice coil: 25 mm Weight of woofer: 0.72 kg Weight of tweeter: 0.03 kg Weight of crossover: 0.185 kg D: 134 mm Re: 2.7 Ohms Fs: 80 Hz Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Spl: 93 dB146,57 €*Shipping: 12,76 €Secure redirect to the provider
-
Hertz Cento CK 130The Cento CK 130 is a 5 Inch (13 cm) Speaker Set from Hertz in a 2-way design with a passive 2-way crossover and a crossover frequency of 2.5 kHz at 12 dB/Oct. A Tetolon tweeter with a 26 mm diaphragm and 20 mm voice coil combines with a 130 mm mid-woofer with a 25 mm voice coil. The impedance is 4 Ohm, the sensitivity is 92.5 dB SPL, and the frequency response ranges from 65 Hz to 22.5 kHz. The power handling is 70 W RMS and 210 W Peak. An oversized ferrite magnet, ultra-compact crossovers, and a durable speaker grille are integrated. Features 5 Inch (13 cm) Speaker Set 2-Way System Passive 2-Way Crossover Crossover Frequency 2.5 kHz, 12 dB/Oct Tetolon Tweeter Mid-Woofer Oversized Ferrite Magnet Ultra-Compact Crossovers Durable Speaker Grille Size 130 mm Tweeter Diaphragm 26 mm Woofer Voice Coil 25 mm Tweeter Voice Coil 20 mm Impedance 4 Ohm Sensitivity 92.5 dB SPL Frequency Response 65 Hz – 22.5 kHz RMS Power 70 W Peak Power 210 W Technical Data D 110 mm Re 3.1 Ohm Fs 80 Hz Le 0.17 mH Vas 6.30 l Mms 8 g Cms 0.50 mm/N BL 4.1 T·m Qts 0.61 Qes 0.72 Qms 3.9 Weight Woofer 0.7 kg Weight Tweeter 0.03 kg Weight Crossover 0.185 kg138,11 €*Shipping: 12,43 €Secure redirect to the provider
-
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
-
What is the refresh rate in Hertz (Hz) at 165 frames per second (fps)?
The refresh rate in Hertz (Hz) at 165 frames per second (fps) would be 165 Hz. This means that the display would refresh 165 times per second to keep up with the 165 frames being displayed each second. A higher refresh rate like 165 Hz can result in smoother motion and reduced motion blur, making it ideal for gaming and fast-paced content. **
-
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
-
What can be done if CK levels and CK-MB levels are too high?
If CK levels and CK-MB levels are too high, it may indicate muscle or heart damage. In such cases, it is important to consult a healthcare professional for further evaluation and treatment. The underlying cause of the elevated levels will need to be identified and addressed. This may involve lifestyle changes, medication, or other interventions to manage the condition and reduce the risk of complications. Regular monitoring of CK and CK-MB levels may also be necessary to track progress and ensure that the treatment is effective. **
Similar search terms for Hertz-Cento-CK-165
-
Hertz Cento CX 165Hertz Cento CX 165 is a 6.5 inch (16.5 cm) coaxial speaker as a 2-way coaxial system. The high-frequency section includes a 24 mm Soft-Tetolon tweeter with a 20 mm voice coil, ferrofluid cooling, RHFC (Rotary High Frequency Contour), and FEM-optimized faceplate. The mid-bass driver uses a 25 mm voice coil on an aluminum carrier, a 165 mm SPP-M membrane made of semi-pressed paper with mica, and a high-density flux ferrite magnet; the tweeter operates with a neodymium magnet. The power handling is 70 W RMS and 210 W Peak at 4 Ohm impedance. Frequency response is 55–22000 Hz and sensitivity is 93 dB. Xmech 4.9 mm. Magnet sizes: woofer 85 x 32 x 15 mm, tweeter 13 x 2 mm; voice coil diameter: woofer 25 mm, tweeter 13 mm. Dimensions A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, F 24 mm, and Und 171 mm. Electroacoustic parameters: D 131.5 mm, Re 3.2 Ohm, Fs 65 Hz, Le 0.21 mH, Vas 12.2 l, Mms 13.3 g, Cms 0.46 mm/N, BL 4.8 Tm, Qts 0.60, Qes 0.73, Qms 3.4. Weight per speaker 0.95 kg. Features 6.5 inch (16.5 cm) coaxial speaker 2-way coaxial system 24 mm Soft-Tetolon tweeter 20 mm tweeter voice coil Ferrofluid cooling in the tweeter RHFC (Rotary High Frequency Contour) tweeter FEM-optimized tweeter faceplate 25 mm voice coil on aluminum carrier (mid-bass driver) 165 mm SPP-M membrane (semi-pressed paper + mica) High-density flux ferrite magnet, low-carbon pole plates (mid-bass driver) Neodymium tweeter magnet Compact 3-spoke basket Rubber magnet protection Speaker grille made of ABS with metallic finish and metal mesh Optimization for off-axis operation Power handling RMS 70 W Power handling Peak 210 W Impedance 4 Ohm Frequency response 55–22000 Hz Weight per speaker 0.95 kg Technical Specifications SPL 93 dB Xmech 4.9 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 13 mm Magnet size woofer 85 x 32 x 15 mm Magnet size tweeter 13 x 2 mm D 131.5 mm Re 3.2 Ohm Fs 65 Hz Le 0.21 mH Vas 12.2 l Mms 13.3 g Cms 0.46 mm/N BL 4.8 Tm Qts 0.60 Qes 0.73 Qms 3.4 A 165 mm B 142 mm C 71 mm D 62.5 mm Und 171 mm F 24 mm85,97 €*Shipping: 12,26 €Secure redirect to the provider
-
Hertz Cento CG 165The Hertz Cento CG 165 is a Speaker Grille for speaker covers in 165 mm. It features a highly durable ABS metal grille as well as a removable metal grille. The diameter is 16.5 cm (165 mm). The finish is in gray. The delivery is as a pair. Features Speaker Grille Speaker covers for 165 mm speakers Highly durable ABS metal grille Removable metal grille Diameter: 165 mm Quantity: 1 pair Color: Gray15,37 €*Shipping: 11,74 €Secure redirect to the provider
-
Hertz Cento C 165 FThe Cento C 165 F is a 6.5 inches (16.5 cm) mid-bass speaker from Hertz with a flat profile and flat speaker basket. Equipped with SPP-M diaphragm (semi-pressed paper with mica) and high-density ferrite magnet. Impedance 4 Ohm, voice coil Ø 25 mm made of pure copper on aluminum carrier. Power handling 70 W RMS and 180 W Peak. Frequency response 65–4,500 Hz, Xmech 3.5 mm. Magnet size 90 x 32 x 10 mm, weight 0.72 kg. Electroacoustic values: D 134 mm, Re 2.7 Ohm, Fs 80 Hz, Le 0.154 mH, Vas 9.40 l, Mms 12 g, Cms 0.33 mm/N, BL 3.9 Tm, Qts 0.80, Qes 1.00, Qms 3.4, Spl 93 dB. Dimensions: A 165 mm, B 141 mm, C 50.6 mm, D 43.5 mm. Features 6.5 inches (16.5 cm) mid-bass speaker Flat profile Flat speaker basket SPP-M diaphragm (semi-pressed paper with mica) Magnet: High-density ferrite Pure copper voice coil on aluminum carrier Impedance: 4 Ohm Power handling RMS: 70 W Power handling Peak: 180 W Frequency response: 65–4,500 Hz Weight per speaker: 0.72 kg Technical specifications Diameter: 165 mm Effective diaphragm diameter (D): 134 mm Voice coil: Ø 25 mm Magnet size (B x T x H): 90 x 32 x 10 mm Xmech: 3.5 mm Fs: 80 Hz Re: 2.7 Ohm Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Sound pressure: 93 dB Dimension A: 165 mm Dimension B: 141 mm Dimension C: 50.6 mm Dimension D: 43.5 mm79,57 €*Shipping: 12,10 €Secure redirect to the provider
-
Hertz Cento Pro CPK 165The Cento Pro CPK 165 is a 6.5 inch (16.5 cm) Speaker Set from Hertz featuring the CP 165 Woofer and CP 25 Tweeter. The system utilizes Center Tuning Duct technology. The power handling is 105 W RMS and 315 W Peak at 4 Ohm impedance. The frequency response is 45–22.5 kHz with a sensitivity of 92.5 dB. The passive 2-way crossover separates at 2.8 kHz with 12 dB/Oct. The tweeter has a 29 mm diaphragm and a 25 mm voice coil, while the woofer has a 25 mm voice coil. Additional specifications: Fs 60 Hz, Re 3.3 Ohm, Le 0.3 mH, Vas 11.5 l, Mms 15.4 g, Cms 0.44 mm/N, BL 5.45 T*m, Qts 0.57, Qes 0.66, Qms 4.3, effective diameter D 131.5 mm, weights 1.07 kg (Woofer), 0.07 kg (Tweeter), 0.2 kg (Crossover). Features 6.5 inch (16.5 cm) Speaker Set CP 165 Woofer and CP 25 Tweeter Center Tuning Duct technology Impedance 4 Ohm RMS power 105 W Peak power 315 W Sensitivity 92.5 dB Frequency response 45–22.5 kHz Passive 2-way crossover Crossover frequency 2.8 kHz at 12 dB/Oct Tweeter diaphragm 29 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 25 mm Size 165 mm Technical Data Effective diameter D 131.5 mm Re 3.3 Ohm Fs 60 Hz Le 0.3 mH Vas 11.5 l Mms 15.4 g Cms 0.44 mm/N BL 5.45 T*m Qts 0.57 Qes 0.66 Qms 4.3 Weight Woofer 1.07 kg Weight Tweeter 0.07 kg Weight Crossover 0.2 kg184,62 €*Shipping: 0,00 €Secure redirect to the provider
-
Is the CK underwear too big?
The fit of CK underwear can vary depending on the style and individual body shape. It's important to consider the specific style and size of the underwear in question. If the underwear feels too big or doesn't provide the desired fit, it may be worth trying a different size or style to find the best fit for your body. Additionally, considering the fabric and stretch of the underwear can also impact the fit. **
-
'How do you like CK One?'
I really like CK One because it has a fresh and clean scent that is perfect for everyday wear. It's not too overpowering and has a unisex appeal, making it versatile for both men and women. The citrus and green tea notes give it a refreshing and energizing vibe, which I enjoy. Overall, CK One is a great fragrance for anyone looking for a light and casual scent. **
-
What does "F*ck dich" mean?
"F*ck dich" is a German phrase that translates to "F*ck you" in English. It is a vulgar and offensive expression used to convey anger, frustration, or contempt towards someone. It is important to be aware of the strong language and potential consequences of using such words in different cultural and social contexts. **
-
Which cable, 60 Hertz or 144 Hertz, is the best for gaming?
The 144 Hertz cable is generally considered the best for gaming. This is because it offers a higher refresh rate, allowing for smoother and more responsive gameplay. The higher refresh rate of 144 Hertz can provide a competitive edge in fast-paced games, as it reduces motion blur and input lag. Overall, the 144 Hertz cable is preferred by many gamers for its superior performance in gaming scenarios. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.